There is a need for a web page that can be updated simply.
A page could have a few updateable fixed blocks
and possibly a block where a simple "markdown" can be used.
Images
Have a list of file names and wrap tags
Using Guestbook idea to update one of the blocks below:-
Experiment with updateable blocks of text.
block3
== Block 3
./images/BufferAmp1.png
./images/E1_DS0067(1).png
./images/E1_DS0067(2).png
./images/E1_DS0067(3).png
./images/E1_DS0067(4).png
./images/E1_DS0067(5).png
== Video Amp Have Shark Tooth
The E1 video amp drives 8 x 75 ohm cables. The signal has a pronounced Shark tooth shape.
The output and is probably designed to drive a circuit:
Amp ---[ 75 ohm ] ---===75ohm coax === | === 75Ohm coax === | -- [75 ohm load ]--
I relality the Amps are driving 8 lengths of un terminated 75 Ohm cable
Amp,Vout --[ Zout ] --+---=== 75ohm coax === | O/C
|
+---=== 75ohm coax === | O/C
|
+---=== 75ohm coax === | O/C
|
+- Vnode
So while the signal is traveling down the 75 ohm coax, it is 75 Ohm resistor.
When the signal bounces off the O/C and back, it is then High Z.
So we can itterate:
Vnode = Vout * K
where K is [ Zout ] / (Zout + Zco-ax/8)
When the signal bounces back for the next T bounce.
Vnode = (Vout-Vnode)*k +Vnode
The speed of signal is 200m / microsecond, but as it got there and back 100m /micro second.
Tbounce = length /100 microseconds.
A cable 10m long Tbounce is about 100 ns
Itterate this and you will get a CR type curve.
What is the Time constant?
For a CR network the t= CR and is when V gets to about 0.63 or = ( 1 - exp( -1 ) )
So when does the way for get to 0.63 of max. It will need more iterations the smaller K, and will be proportional to t.
If we itterate for k = 0.1 you need about 8 itterattions before Vnode gets to 63%
What is a typical Zout? 75 ohm. K = 0.11
It takes about 8 itterations to get to 63 % or the "TimeConstant"
So for a 10 metre cable it takes 8 * 100ns or 800ns.
__---___ ___---___
---