https://www.plus.net/help/archive/broadband/thomson-585-faqs-and-troubleshooting/

Internet
 


Connection Information





Uptime:
0 days, 0:20:26

Data Transferred (Sent/Received) [MB/MB]:
3.38 / 44.21

Username:
dougrice@plusdsl.net

Password:
********

Remember Password:
Yes

IP Address:
212.56.108.219

Primary DNS:
212.159.6.10

Secondary DNS:
212.159.6.9



=======================================
What are the router username and password?
=======================================

You'll need to give a username and password before you can get to the settings for your router. You'll find them on the setup sticker included with your router. Still not sure or can't find the setup sticker? Please see the table below:
When did you receive your Thomson router?
Router Username
Router Password
27th Nov - 3rd Dec 2008
Administrator
Serial Number -CP1103SF5JP
3rd Dec 2008 - 23rd Nov 2009
Administrator
No Password
24th Nov 2009 onwards
admin
Serial Number
• The Serial Number is printed on the bottom of your router (pictured)
• If there's a number in brackets, ignore it. In this example, the router password would be CP0752SFB4J 

tr069@plusdsl.net
******

tech:ccf7qdqy


System Configuration

This page lets you configure your Thomson Gateway.

Service Configuration
You cannot directly edit the service settings of your Thomson Gateway.In order to modify those settings, you must use the Configuration Wizard and follow the instructions appearing on the screen.

Service Name:
Plusnet


=======================================
How do i do a factory reset?
=======================================
If you have any problems setting up your router, you can reset it and start again.
Use a paperclip, pen or pointed object to press into the reset pin hole on the back of the router. 
Keep the button pressed in for at least 7 seconds. When the power light goes red, release the button and wait until the power light turns green again.
From this point on, your router will be restored to 'Factory Settings' so you'll need to start again from the beginning of this guide.





f you'd like to change the wireless name or password, please see How do I change the wireless settings?.
The wireless name (SSID) will start with PlusnetWireless and may have extra letters and numbers at the end, e.g. PlusnetWireless123456. 

If you're still not sure, you'll find it on the on the bottom of your router and the included setup sticker. 

Your wireless password is 10 characters long and is shown on the included setup sticker and the bottom of your router (see the wireless key or WPA PSK pictured). 



                   PPP links) remains.

Following command groups are available :

auto            debug           mcast

{doug}[ip]=>trt
Unknown command.
{doug}[ip]=>t
Unknown command.
{doug}[ip]=>rtlist
Label             Destination          Gateway  Interface     Mtc Admin  Oper
                 10.0.0.138/32       127.0.0.1  loop          0   UP     [UP]
                 10.0.0.255/32       127.0.0.1  loop          0   UP     [UP]
                  127.0.0.1/32       127.0.0.1  loop          0   UP     [UP]
              192.168.1.254/32       127.0.0.1  loop          0   UP     [UP]
              192.168.1.255/32       127.0.0.1  loop          0   UP     [UP]
             212.56.108.219/32       127.0.0.1  loop          0   UP     [UP]
            255.255.255.255/32       127.0.0.1  loop          0   UP     [UP]
            195.166.130.249/32  212.56.108.219  Internet      0   UP     UP
                212.159.6.9/32                  Internet      10  UP     UP
               212.159.6.10/32                  Internet      10  UP     UP
                   10.0.0.0/24      10.0.0.138  LocalNetwork  0   UP     [UP]
                192.168.1.0/24   192.168.1.254  LocalNetwork  0   UP     [UP]
                    0.0.0.0/0   212.56.108.219* Internet      10  UP     UP
{doug}[ip]=>
{doug}[ip]=>
{doug}[ip]=>route list
Unknown command.
{doug}[ip]=>